AnyPin DMD + NVRAM Battery Eliminator. The low cost version of AnyPin NVRAM that will work in all DMD pinball machines manufactured up to 2006*, *PLUS* Williams/Bally System 9, System 11, Bally 6803 and Data East games that originally used 6116 RAM. Any game that originally used either 6116, 6264 or 62256 RAM will work with an anyPin DMD+!
The original AnyPin NVRAM Battery Eliminator was first released a few years ago. The goal was to have a single part to eliminate batteries in pinball machines. The original AnyPin NVRAM option is still available with the Universal AnyPin NVRAM and works in most every solid state pinball machine ever made.
Two simple questions can be answered to know for sure if anyPin DMD+ will work in your game to eliminate the need for batteries.
1-Does your game have a DMD? 2-Does your game use AA batteries originally from the factory to keep settings and high scores?
If you answer yes to one or both of these questions, then anyPin DMD+ will work in your game. If you answer no to both, then you need to use the original Universal anyPin NVRAM to be sure of compatibility with your game
*Stern games manufactured before 2006 (Whitestar), all WPC, System 9, System 11, 6803, Sega, and Data East machines are fully compatible with anyPin DMD+.
NOTE: Stern games made after 2006 and Gottlieb System 3s are not compatible
NOTE: Early Williams/Bally games that have not had the ram replaced will need to have the original ram removed and a chip socket installed. If your game already has a socketed ram this unit is easily installed
